Home →
Units →
Rigid Kitchen →
Base →
Angled Kitchen Base Storage Units - Highline

All Prices Include VAT

Base Wall Tall Storage Oven Fridge/Freezer Dresser Plinth/Panels

Angled Kitchen Base Storage Units - Highline

from £119.86 £133.16

SALE: ENDS DEC 16th

Angled Kitchen Base Storage Units - Highline

Angled Kitchen Base Storage Units - Highline - shown with doors and/or storage (not included)

Product

Specification

Angled Kitchen Base Storage Units - Highline

from £119.86 £133.16

Angled front kitchen base storage unit for pull-out storage wirework. 20mm service void. Depth: 560mm Note: Doors can only be hinged on the short side.

Note: Pull-outs, wirework, doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately.

Note: Minimum order applies - see details

Code: 25ABHP

This angled base unit requires the following door and drawer fronts:
Highline
250mm wide takes Door 715mm high x 296mm wide.
370mm wide takes Door 715mm high x 396mm wide.

Full side is 560mm deep as standard and reduced side is 360mm deep.

Note: Doors can only be hinged on the short side.

250mm wide units use a special hinge for 45° angled doors. 370mm wide units use a special hinge for 30° angled doors. The appropriate hinges are included and installed.

See Datasheet for more details.

Select finish

*Width (mm)

* Required Fields

Height: 720mm - Depth: 560mm

Note: Height does not include legs (where applicable).

Door and/or drawer front requirements

Select options to see required doors/drawer fronts

All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.

*UNIT HANDING