Home →
Units →
Rigid Bedroom →
Wardrobe →
Single Stable Wardrobe

All Prices Include VAT

Bedside Standard Height Tallboy Wardrobes Bridging Plinth/Panels

Single Stable Wardrobe

from £246.32 £273.7

SALE: ENDS DEC 16th

Single Stable Wardrobe - shown with doors and/or storage (not included)

Product

Specification

Single Stable Wardrobe

from £246.32 £273.70

Single width stable wardrobe. Multiple heights and depths available. Heights: 2160, 2260, 2360mm. Depths: 400, 500, 600mm. Check specifications tab for blank details.

Note: Doors and drawer fronts are for illustration only and are not included with the unit - please purchase separately.

Note: Due to the size of these products, they will be supplied flat-pack. You will require a professional tradesman to assemble these products. We do not supply assembly instructions with these products but they are simple to assemble to a professional tradesman.

Note: Minimum order applies - see details

Code: ROBESS50

500/600w blank at bottom. Enter required blank height. Depending on wardrobe height and width, a 720mm high blank will required 1335/1435/1535h x 496/596w door at top. Blank included. The required door height depends on the height of the blank. As standard, blank height will be adjacent unit height (excluding worktop) plus 60mm (to allow for worktop and clearance) minus 100mm (blank starts above plinth). E.g. for 760mm high adjacent units blank height = 760 + 60 - 100 = 720mm. 18mm matching shelf supplied. Cabinet is drilled for choice of two fixed positions, either 400mm down or central for double hanging. No hanging rails included. Wardrobe height includes the height of the 100mm plinth. 18mm Egger board construction with 18mm solid back panel. Supplied flat packed. Supplied with gable ends to floor, 4 adjustable feet and 100mm plinth, flush to facia. Note that you also need to purchase end panels if the wardrobes do not go up to the wall.

Bedroom unit tops

Profiled edge bedroom unit tops can be supplied in the Unique and Bella vinyl ranges with the profiled edge of the top matching the profiled edge of the doors being used. These can be used as cornice on tall bedroom units by inverting the top so the profile is on the underside. These tops are all made to measure. For rectangular profiled tops, see Unique profiled edge work tops or Bella Profiled Edge Matching Work Tops . Radius, angled, round, shaped and corner tops are also available, please contact us to order these on 0330 135 9191.

See Datasheet for more details.

Select finish

*Width (mm)

* Required Fields

*HEIGHT (MM)

*DEPTH (MM)

Note: Height of bedroom units includes the 100mm plinth.

Door and/or drawer front requirements

Select options to see required doors/drawer fronts

All of our units up to 1000mm door height are drilled as standard 100mm from top and 100mm from bottom (as measured from the door edges). All units with doors over 1000mm tall will have 3 hinge drilling locations with a hole in the centre. All units with doors over 1700mm tall will have 4 hinge locations with 2 centre drillings. Top hung units are drilled 100mm in from the left and 100mm in from the right. If you need any more help please get in touch.

*Blank Height(mm)

As standard, blank height will be adjacent unit height plus 60mm (top and clearance) minus 100mm (blank starts above plinth). E.g. 720mm for 760mm high adjacent units.

*UNIT HANDING