However, there are a few key steps you can take to ensure a high-quality installation when fitting your kitchen units. To help our customers achieve the best possible self-installation, we are providing a simple guide to installing kitchen units effectively.

A Step-By-Step Guide To Installing Kitchen Units

Before You Start

Before installing kitchen units, there are a few essential steps that you need to take, including gathering equipment and preparing your kitchen for the installation.

Equipment

Installing kitchen units requires some equipment:

• Spirit level
• Clamp
• Drill
• Masking tape
• Screws
• Brackets
• Cable and pipe detector/Studfinder
• Hammer drill
• Wall fixings

Steps To Take Before Starting

Before you begin installing your kitchen units, there are a few points that you need to be mindful of to ensure that you get the best possible results:

• Check the floor level before starting. If your flooring is uneven, adjust the legs of your cabinets until they are level before completing the installation.
• Be careful not to over-tighten the screws; this can damage your cabinets.
• Always use the fixings provided with the unit.
• When drilling into the wall, make sure you have clearly marked guide holes to follow.
• Hanging a wall cabinet or a large base cabinet often requires two people. Ask for help from a friend or family member when lifting and fitting if required.
• When fixing the provided doors and handles, make sure you use a step ladder rather than standing on the base cabinets or worktop, as this can cause unnecessary damage.
• Check the level of every unit after installation: finding uneven units at the end will be harder to fix once everything is installed.

How To Install Kitchen Units

How To Install Base Units

Before installing your new kitchen unit, you should have already uninstalled and disposed of your previous units, including disconnecting any electrical and water connections. After uninstalling the previous units, you may also want to paint the area, as it may have faded over time.

Once all the old units have been uninstalled and the area has been painted and left to dry, you are now ready to begin installing your new base units.

• Step 1: Mark a horizontal guideline on your wall using a spirit level and a pencil. This will mark the location for the top of your kitchen base units. Remember to leave space for the legs.
• Step 2: Follow the manufacturer’s instructions to build the base units. Every manufacturer’s instructions will be slightly different, so it’s important to read these carefully before starting. While screwing the panels together, you can use a clamp to keep them together, ensuring a uniform installation.
• Step 3: Starting with any corner units, push the cabinets into place. Ensure the legs are in the correct position, and check the units with your spirit level to make sure everything’s uniform.
• Step 4: Next, attach the adjoining units to keep them secure. There will be hinge holes pre-drilled into your units. Clamp the adjoining units together before drilling a pilot hole between the two hinge holes, making sure you go into, but not completely through, the next unit. Then, screw the units together.
• Step 5: Fix the units to the wall using brackets after marking the drill positions with a pencil. Make sure to check for wires and pipes with your cable and pipe detector or studfinder before drilling into the wall, and use the appropriate brackets/screws depending on the wall material.

How To Fit Kitchen Wall Units

Fitting kitchen wall units often requires an extra set of hands, so make sure that you have a trusted friend, neighbour, or family member nearby to help with the installation.

• Step 1: Mark the tops of the base cabinets, then use a spirit level to mark a horizontal guideline on the wall for the bottom of the wall cabinets. Remember to allow for the worktop thickness and the space needed for appliances and workspace. Then, measure and draw another guideline for the top of the wall cabinets. You can temporarily fix a batten to the wall to support the units during installation if needed.
• Step 2: Assemble your kitchen wall units by following the manufacturer’s instructions.
• Step 3: When it comes to how to hang a cabinet on the wall, following the manufacturer’s instructions is essential. Work out the right placement for the wall brackets. Most kitchen wall cabinets will need two brackets (one in each top corner). Remember to use the best fixings for kitchen wall cabinets for your wall material.
  
  Hold the bracket in place and mark out the holes with a pencil. How you actually install the bracket will depend on the type of wall you’re working with and the kitchen wall unit hanging brackets instructions. Remember to watch out for wires and pipes before screwing into the wall.
• Step 4: After the brackets are properly secured, you can hook the wall cabinets onto them. Use adjustment screws in the top corners of the cabinet. Place a spirit level on top of the cabinet while you screw it in to ensure everything’s even.

Breathe New Life Into Your Home With Our Rigid Kitchen Units

At Kitchen Door hub, we’re passionate about helping our customers discover the kitchen of their dreams.

Whether that means installing new base and wall units in their kitchen, choosing from our wide range of handles and hinges to meet your chosen aesthetic, or even selecting a brand-new kitchen door to complete the look, our range includes everything our customers need for a bespoke kitchen solution.

In addition, some of our ranges are available with free UK delivery for orders over £500, so check our delivery options carefully to see if you can benefit.If you have any questions about our products or are interested in custom sizing, contact us, and a member of our team will be happy to help.

The post How to Install Kitchen Units appeared first on TheHub for Home & Kitchen DIY.

At Kitchen Door Hub, we are committed to providing you with a brand new kitchen with confidence; therefore, we will begin to break down each factor in the cost process and provide realistic budgets that you can consider without stress. 

Why Do Kitchen Cost Prices Vary? 

Before diving straight into daunting numbers, it is important to break down the reasons why kitchen costs differ between homes, to help provide you with a better understanding of your own budget. 

For a new kitchen renovation, typical charges will include: 

• Cabinetry and Units
  
• Appliances
  
• Worktops
  
• Installation and Labour Costs
  
• Plumbing, Electrics, Etc. 

Each of these factors will come with its own variants on price, depending on the quality, brand and complexity of the project. It is also important to take into account the size of your kitchen, i.e. larger kitchens will most likely cost more overall, as there is more space to work with. 

What Is The Average Cost Of A New Kitchen in The UK?

To work out the cost of your specific home, it is important to look at the average cost across the UK based on the variety of kitchen renovations available. Each aspect of your kitchen needs to be accounted for when creating your budget price. Average prices can also vary depending on where in the UK you live; therefore, an average ballpark figure would be as follows: 

• Budget Kitchens – £3,000-£8,000: Budget Kitchens are perfect for those with a smaller home and budget. With a smaller kitchen comes a smaller amount of cabinets, appliances and worktops, therefore lowering the price significantly.
  
• Mid-Range Kitchens – £8,000-£18,000: Mid-Range Kitchens tend to be the average ballpark figure, and the most common choice when opting for a full kitchen renovation. Mid-Range Kitchens often include Integrated Appliances, higher-quality worktops and additional cabinets. However, depending on the materials used, you may be looking at the higher end of the budget.
  
• Premium Kitchens – £18,000-£30,000+: Premium Kitchens offer the highest quality materials for your renovation, with options such as quartz worktops and designer touches. 

Each of these figures includes everything you would need for a full renovation, including units, worktops and appliances, as well as basic trades such as plumbing and electrics. If you required structural changes, however, this would significantly push the figures upwards. 

As a quick rule of thumb, budget kitchens would be for those wanting a small basic kitchen, with laminate worktops, a mid-range kitchen would be ideal for those wanting integrated appliances, with higher quality materials, and premium kitchens are there for those looking for premium appliances, extensive worktops and structural changes. 

Which Factors Will Affect My Overall Cost For A New Kitchen?

Now that we have discussed the overall estimated price of a new kitchen in the UK, we can begin to break down each section to figure out exactly what is necessary for your home improvement in order to budget accordingly and stay within your price limit. 

• Kitchen Cabinets: If you are updating your kitchen cabinets, this will likely be where the majority of your budget will go, depending on the material, design and construction.
  
• Appliances: If it is necessary to update all of your appliances, then this will also play a major role in the overall total spend for your kitchen, with a complete set of standard appliances costing between £1,500 and £3,000, rising in price for well-known brands.
  
• Worktops: Ultimately, worktops are an essential and necessary part of a kitchen. Therefore, choosing the right one for you is necessary to achieve functionality, but also to enhance your new aesthetic. Each type of kitchen worktop will come with a different price range, including: 
  • Laminate: £100-£300 per metre.
    
  • Solid Wood: £150-£400 per metre.
    
  • Quartz: £350-900 per metre.
    
  • Granite: £400-£1,000 per metre.
    
• Kitchen Size and Layout: The size and layout of your kitchen will be a major factor in deciding a budget for your renovation. For example, smaller kitchens are likely to cost less than a larger kitchen; however, depending on the extent of your makeover, i.e. if you are changing the layout, this will then raise the price further. If you are working with an L-Shaped kitchen or an Open-Plan kitchen, this will also have a major impact on the budget, as the larger the space, the more you will require additional materials and units.
  
• Finishing Touches: The final finishing touches are often forgotten from the price of an initial budget, including replacement handles and hinges, and lighting. It is crucial to account for these additions from the beginning of the budgeting process to ensure that surprise costs are not brought up unnecessarily.
  
• Labour and Installation: Although they may not be necessary depending on your situation, it is still important to budget in for fitters when creating your renovation in case any issues arise throughout the process. If you are already planning on using outsourced labour, here are some ballpark estimates: 
  • Each installer will have their own installation fee. Although we cannot provide examples for everyone, more often than not, installation fees vary between £1,500 and £8,000. For smaller kitchens and fewer labour needs, these costs may significantly drop.
    
  • If an entire rewiring is needed for your kitchen, or plumbing work is necessary, this will, of course, raise the overall price.
    
  • Although this may be a hefty addition to your budget, ensuring that your kitchen is fitted correctly and safely should be your highest priority. 

How Can I Reduce The Cost Of My Kitchen Renovation? 

There are many simple ways to reduce the cost of your brand new fitted-kitchen without having to compromise on style and functionality. For example, here are a few ways in which you can have a smaller budget, whilst still achieving your dream layout: 

• Choose a Mixture of Materials: If you have your heart set on a specific material for a worktop, for example, but you cannot stretch your budget to cover the full amount, try opting for implementing that material in a specific area, such as on a kitchen island, and using a cheaper alternative on the remainder of your worktops. By doing so, you can still achieve a luxurious aesthetic without having to break the bank.
   
• Refurbishing, Rather Than Replacing: Find simple ways in which you can maintain your original kitchen cabinets without having to implement a full renovation. For example, opting for replacement kitchen doors is a cheaper alternative, with made-to-measure options for a simple fix without the price point. If you are happy with your cabinets and cabinet doors, but you are still looking for a way to upgrade your space, why not try replacing your worktops for an instant update without the full rework?
  
• Stick To The Kitchen’s Original Layout: Although a change in layout can instantly upgrade your kitchen, you have to budget for the additional charge for professional plumbing and electrical work where necessary. Sticking to your original layout can help to reduce any unnecessary costs, whilst still giving your kitchen a well-deserved makeover you can be proud of.
  
• Shop In The Sales: If you are working with a super tight budget, the simplest way to work alongside it is to shop for your new kitchen in annual sales, or even purchasing in bundles to help reduce the cost. 

How Do I Budget Accordingly? 

Budgeting accordingly is a simple task once you have broken down each factor of your desired upgrades. By doing this, you can stay in control of what you are spending, to avoid any surprise costs in the future. 

By looking at each factor of your kitchen individually, as well as the supplies each section will require and cost, you can gain an estimated budgeting plan. Below is an example which will fit the majority of customers: 

• 50% Cabinets
  
• 20% Worktops
  
• 15% Appliances
  
• 10% Installation
  
• 5% Additional Finishing Touches

However, we would recommend trying to save an additional 10% contingency where possible, to help cover unexpected costs, such as if any issues arise that were not planned for. 

It is important to remember that each kitchen will have its own priorities. Depending on the size of the space, the accessibility needs you may have, and the non-negotiables you may desire, using this budget breakdown will help you to organise your finances accordingly, prioritising your own personal needs. 

How Much Should I Spend On A New Kitchen? 

Now that you have broken down each of the elements which will factor into your kitchen upgrade, you are now ready to begin your renovation journey. 

Proper budgeting and utilising your kitchen space can help to provide long-term property value, but most importantly, can provide everyday comfort in your home for you and your family. Understanding how each aspect of the kitchen upgrade can affect the overall cost can help you to find simple ways to adapt your budget and kitchen needs/wants, by cutting unnecessary costs wherever possible. 

Adapting to use specific cost-saving materials, sticking to your original layout and creating a well-structured layout can help you to create your dream kitchen and home without having to exceed your budget. For support on getting started with your dream kitchen makeover, contact us today, where one of our specialists will be more than happy to help you find budget-friendly ways to get the kitchen you deserve.

The post How Much Does A New Kitchen Cost? appeared first on TheHub for Home & Kitchen DIY.

Over time, doors can become misaligned due to everyday use and humidity, making your space appear unnatural. Fortunately, learning how to adjust kitchen cabinet doors properly is a simple, cost-effective way to dramatically improve your kitchen’s appearance without calling in a professional. 

With just a screwdriver, you can transform your kitchen in minutes, achieving perfect alignment and showcasing it as it deserves. 

Why Are My Kitchen Cabinet Doors Unaligned? 

Unaligned cabinet doors occur naturally over time, so it is essential to know how to quickly fix this issue for a time-effective solution to keep your kitchen professionally finished. 

With temperature fluctuations in a kitchen, moisture can fluctuate and naturally loosen fixtures. There are many other common causes, such as: 

• Daily Use: Opening and closing cabinets will naturally misbalance your hinges and fixtures over time.
  
• Changes in Humidity: This can cause wood doors to expand or contract, affecting their position.
  
• Uneven Installation: If your cabinet doors have been installed unevenly or walls have begun to settle, this will also cause misalignment.
  
• Loose Screws: Natural wear and tear will affect the alignment of your doors.
  
• Heavy Items: Any items stored on your cabinet doors, such as towel hooks or organisers, will affect the alignment.

Regardless of the cause, adjusting cabinet doors is a simple, straightforward task that requires only one tool. 

Understanding The Types Of Hinges You’ll Be Adjusting

Taking time to understand the type of hinges you are working with is essential to restoring your alignment. 

Many modern kitchens with handleless designs may use push-to-open hinges, which are concealed within the cupboard to give an effortless finish. In contrast, other kitchens may use mounted or butt hinges, which are visible from the outside to offer a more traditional finish. 

Although the use and functionality of both are similar, the screw positions differ, so it’s essential to determine which approach to take before proceeding. If you are still unsure, search online for the brand name or model number for specific adjustment instructions. 

Most common hinges will have three adjustable screws, each of which controls a separate function within the movement of the cabinet door: 

1. Side-To-Side Adjustment: This adjustment is the most commonly needed, as it moves the door left to right to correct gaps.
   
2. Height Adjustment: This adjustment raises or lowers the door as needed.
   
3. Depth Adjustment: Finally, the depth adjustment is necessary to move the door closer to or farther from the unit frame, ensuring the door sits flush against it. 

Now that you have understood the function of each element of the door’s hinges, you are ready to begin learning how to adjust your kitchen cabinet doors for a simple DIY fix. 

How To Adjust Kitchen Cupboard Doors

Step One: Check Your Door For Misalignment

Take a step back from your cabinets and assess the following: 

• Do your doors overlap?
  
• Are your doors too high, or too low?
  
• Do your doors sit flush with the cabinet frame?
  
• Are your doors failing to close properly?
  
• Is there an uneven gap between the doors? 

Identifying your issue will help you determine which adjustment method is needed and by how much. 

Step Two (If Necessary): Adjust Your Side-To-Side Alignment

If your cabinet doors are rubbing together, crooked, or misaligned with their neighbouring doors, a Side-To-Side adjustment is necessary. 

To do so: 

1. Open the cabinet door and locate the adjustment screw (1).
   
2. Turn the screw clockwise to move the door closer to the hinge.
   
3. To turn the screw further away, turn the screw counterclockwise.
   
4. Take your time to ensure the doors are level and no longer rub against each other. 

Step Three (If Necessary): Adjust Your Height Alignment

Similarly, if you believe your cabinet doors are sitting too high or too low on one side, or are not level with their neighbouring doors, you need to adjust the hinge plate. 

To do so: 

1. Open your cabinet door and locate the mounting screws (2 and 4).
   
2. Loosen the screws slightly, ensuring they do not come off completely.
   
3. Adjust the door up or down as needed, then retighten the screws once the door is perfectly level. 

Step Four (If Necessary): Adjust Your Depth Alignment

Depth alignment is necessary when your doors do not close properly or are not sitting flush. 

To do so: 

1. Open your cabinet door and locate the depth screw (3).
   
2. Turn the screw clockwise to pull the door inward toward the cabinet.
   
3. To push the door outwards, turn the screw counterclockwise. 

Step Five (If Necessary): Adjust Your Soft-Close Hinge Alignment

If your kitchen cabinets have soft-close mechanisms, there is a simple way to fine-tune their closing speed. For example, if your doors slam shut or struggle to close, adjusting the mechanisms can easily slow or speed up the process. 

Most soft-closing hinges operate on small switches, so a low-resistance switch will produce a slower, gentler close, whereas a high-resistance switch will produce a firmer, quicker close. 

Step Six: Tighten All Screws

Once your kitchen cabinet doors are correctly aligned, check that all hinges have been tightened if loosened and that no screws are missing or out of place. Test each door to ensure it opens and closes fully as designed, and that it will not misalign, for a polished, perfected kitchen. 

Extra Tips For Polished Alignment

To ensure your kitchen cabinet doors are showroom-standard, follow these additional steps to achieve a polished finish. 

1. Make Small Adjustments: Making large turns while adjusting your screws can cause overcorrection, so take your time and be patient between turns to ensure proper alignment and ease of use.
   
2. Align Doors In Pairs: For cabinets with double doors, adjust them simultaneously to ensure a uniform finish.
   
3. Use the Right Tools: There is no need for fancy tools or a professional; a simple Phillips screwdriver will do the trick.
   
4. Replace Old Hinges Where Necessary: If your hinges won’t tighten, are loose, or your soft-close function isn’t working, then it may be time to replace them.
   
5. Clean Your Hinges Regularly: Once you have mastered the art of hinge alignment, ensure you clean and dust your hinges regularly, as grease can affect hinge operation. 

Common Alignment Problems and Simple Fixes

Here are a few simple fixes for common alignment problems that may occur:

• My Door Won’t Fully Close: Adjust your depth screw (3) to bring the door closer to the frame.
  
• My Doors Are Rubbing Together: Adjust your side-to-side screw (1) to control the gap between them.
  
• My Doors Are Sagging: Retighten the height-adjustment screws (2 and 4) and verify that the hinge arms are correctly connected.
  
• My Doors Are Twisted: This may be a combination problem – adjust and test each of the screws slowly to see which alignment benefits you. 

Why Does Proper Kitchen Door Alignment Matter? 

Correctly aligning your kitchen doors is a quick, simple process that will elevate your kitchen to a showroom standard in minutes. Although it may seem daunting, adjusting kitchen cupboard doors is one of the easiest DIY fixes you can do, and it will enhance your home’s overall value. With regular maintenance and care, your home can be functional, accessible and looking professional in just a few simple steps. 

To go the extra mile, consider upgrading your kitchen cabinet handles for a more polished finish. For more information or a chat with one of our experts, contact us today – we are happy to help.

The post How To Adjust Kitchen Cabinet Doors appeared first on TheHub for Home & Kitchen DIY.

Rather than ripping out the entire kitchen, replacing your cabinet doors can give your space an instant makeover without breaking the bank – but how much does it actually cost? 

Why Should I Replace My Kitchen Doors Instead of the Whole Kitchen? 

There are several advantages to replacing only your kitchen doors, rather than installing a completely new kitchen. 

• Cost-Effective: The most significant factor comes down to the cost of the project. For a full brand new kitchen, you can be looking at anything from £3,000 to £20,000 based on the size, quality and labour. Swapping only your cabinet doors makes the project remarkably cheaper. At Kitchen Door Hub, we specialise in making Custom Fit Kitchen Cabinet Doors, which are DIY friendly, making them the perfect quick and easy weekend job, saving you time and money. From Handleless Doors to Shaker Kitchen Doors, no matter the style you are after, we have you covered, without breaking the bank. 

• Sustainability: Reusing your existing Kitchen Units will reduce waste from a full kitchen replacement. 

• Speed: Replacing only your Cabinet Doors can be a 1-3 day job, providing you with well-needed time to complete other projects around the house, whereas a full kitchen refit can take up to 3 weeks. Having the flexibility with time can also provide less disruption for you and your family, giving you a brand new kitchen in only a few days. 

What Will Affect The Price of My Replacement Kitchen Doors? 

The price of your Replacement Kitchen Doors will depend on a number of key factors, as not every kitchen will be the same. 

• The Number of Replacement Doors: The more Kitchen Doors or Kitchen Drawer Fronts that you need, the higher the total cost. For example, smaller kitchens may only require 8-10 doors/drawers, whereas larger kitchens may be looking at up to 20-30, depending on the layout. 

• The Material and Finish: Prices of finishes can vary depending on the style you are looking for. For example, Solid Wood Cabinet Doors tend to cost around £50-£100 per door, depending on the size, whereas High-Gloss Cabinet Doors tend to be much cheaper, around £25-50 per door. 

• Hinges and Handles: It may not be necessary to replace your Hinges and Handles, but it should be factored in. Most Handles can be reused, depending on the style of Cabinet Door you are looking at, which will help save you money on your renovation. If you want to go the extra mile within your budget, we offer a variety of Handles and Hinges, perfect for every aesthetic. 

• Labour Costs: We offer full Made-To-Measure Cabinet Doors, which can be easily installed yourself without the hassle of having to source outside labour. Hiring a professional fitter can cost anywhere between £250-£400, depending on the number of doors. Save yourself time and money by going down the DIY route, having a brand new kitchen in only a few days. 

How Can I Save Money When Replacing My Kitchen Doors? 

There are many cost-saving ways to save money when it comes to replacing your Cabinet Doors, all based on each factor you must consider. 

• Stick To The Original Layout: Try to stick to the original layout of your kitchen doors, and avoid having to pay for modifications. 

• Reuse Your Hardware: If you want to stick to a tight budget, keep your original Hinges and Handles if they are still in good condition. For a quick makeover, try spray painting your handles for an easy upgrade. 

• Choose Simple Materials: If you are not in the market for a luxurious style kitchen, there’s no need to buy luxurious (and ultimately expensive) cabinets. Stick to your desired aesthetic and find cheaper alternatives for a similar style. For traditional, cottage-style kitchens, try Shaker Kitchen Doors, perfect for cosy environments. If traditional is not your taste, try Handleless Kitchen Doors for a more modern upgrade. 

• DIY Installation: Save time and money on hiring a professional with our easy Made-To-Measure Cabinet Doors, which are designed specifically for easy DIY installation. 

• Get Installation Quotes: If you do not feel confident enough to DIY your makeover, or do not have the ability to, don’t panic. Get multiple quotes from a variety of installers and compare labour costs to find the right fit for you. 

Is It Worth Replacing Just My Cabinet Doors? 

If you are not able to budget for a full kitchen renovation, then simple changes such as replacement cabinet doors are absolutely worth it. 

A full-scale renovation may be unnecessary if the original carcasses are still well intact, avoiding disruption and saving your money. Opting for Replacement Kitchen Doors can still offer you the appearance of a brand new Fitted Kitchen, without requiring a full re-fit and still offer a completely fresh and modern look. Focusing on the Cabinet Doors will also save you time, as it can be completed in a matter of days, and help you reduce your waste. 

Keeping your budget in mind when making your final decisions, if you are set on replacing your Kitchen Cabinet Doors, expect to pay around £350-£500 for smaller kitchens, £500-£1,000 for average-sized kitchens and £1,000-£3,000 for large or bespoke kitchens. Replacing your Kitchen Doors is a much more affordable option than a full kitchen re-fit and can assist in transforming your kitchen in a matter of days, versus weeks. If, for any reason, you are still uncertain, don’t worry. At Kitchen Door Hub, we offer so much more than just Cabinet Doors. We can assist you in finding ways to upgrade your kitchen on a budget and still have a functional and aesthetically pleasing kitchen in the end result. Contact us today to start your kitchen renovation with reassurance.

The post How Much Does It Cost To Replace Kitchen Doors? appeared first on TheHub for Home & Kitchen DIY.

Whether you’re in the market for a home refresh or updating your cabinets for resale, our step-by-step guide will walk you through exactly how to paint kitchen cupboards and create a kitchen to be proud of. 

Why Should I Paint My Kitchen Cabinet Doors?

Finding cost-effective solutions to everyday life is the easiest way to create a home you love, without breaking the bank. Instead of replacing your kitchen units completely, keep the carcasses in place and transform your cabinet doors to fit every aesthetic. 

Here are just a few ways painting your kitchen cabinet doors is the way to go for a home refresh: 

• Saving Money: It’s simple, but it’s true. Painting your kitchen doors costs a fraction of the price of a brand-new kitchen.
  

• Modern Updates: Styles change, aesthetics differ. With just a few hours of your time, your kitchen can be transformed from dated to modern with these few easy steps.
  
• Minimal Disruption: There’s no need for major building work or long installation; with just a paintbrush and some patience, you will be showing off your kitchen in no time.
  
• Eco-Friendly Upgrade:  Reduce your waste and make your project more sustainable for the planet by reusing your existing cabinets. 

Which Tools and Materials Will I Need?

Before you get started on creating your brand new kitchen, ensure you have the essentials to make each step as easy as possible. 

Tools: 

• Screwdriver/Drill (for removing cabinet doors and handles)
• Sandpaper (preferably 120-220 grit)
• Brushes
• Mini-Rollers
• Masking Tape

Materials: 

• Primer
• Paint (either satin, semi-gloss, or specialist cabinet paint)
• Degreaser or sugar soap

How to Paint Kitchen Cabinet Doors

Now that you have all your tools and materials ready, it’s time to take the plunge and start building your perfect kitchen. 

Step 1: Prepare Your Space

The easiest way to begin any project is to lay out the basics. Here are some top tips before you get started: 

• Take each cabinet door one at a time to avoid confusion for a smooth finish. 
• Label each cupboard and hinge once removed to make sure reassembly is easy and you don’t misplace anything!
• Declutter and cover the surrounding areas with a dust cover to protect from dust and paint spillages. 
• Use your masking tape to protect tiles, walls and backsplashes from drips. 

Step 2: Clean and Degrease your Cupboard Doors

Kitchens are notorious for grease buildup, especially around the trickiest areas such as hobs and handles. To ensure proper adhesion of your cabinets, degreasing your doors is essential. 

Wipe down each surface – both inside and out – using either a degreaser or simple sugar soap. Pay extra attention to the edges of the doors, where build-up is most likely. Ensure that the doors are completely dry before moving on to our next step. 

Although this may seem time-consuming, skipping this step will prevent the paint from properly adhering to the surfaces, leading to unnecessary extra steps later on. 

Step 3: Sand the Surfaces

Sanding your cabinets will help remove any existing gloss, providing your primer with the perfect surface to grip. Make sure to use a light grip when sanding, and focus on the cupboard door fronts, drawer fronts and cabinet frames. 

Starting with a piece of 120-grit sandpaper will help to remove the sheen on the cabinet, before finishing with a 220-grit sandpaper for a smooth and even texture. Using a sanding block or electric sander will save you some time and be useful for larger surface areas, though this is not essential. Make sure to fold the sandpaper to reach into any grooves and corners for intricate cupboard doors. 

After sanding, wipe away any existing dust with a damp micro-fibre cloth, and get your tools ready to begin priming. 

Step 4: Apply your Primer

Using a primer is an essential step in making sure your hard work stands the test of time. Primers are perfect at preventing stains from bleeding through and making your paint stick evenly. 

Apply a thin, even layer of primer using a roller-brush for flatter areas and a small brush for edges and detailed moulding. Let the primer dry for the allotted time according to the manufacturer’s instructions. Then, lightly sand the cupboard doors again to smooth out any brush marks and uneven textures before you begin painting your final colour. 

Step 5: Paint your Cupboards

Now that you have completed the mundane essential steps, it’s time for the fun part – bringing colour to your kitchen. 

High-quality satins or semi-gloss paints are the durable choice for your paint, as they create a smooth finish that is easy to wipe clean. Specialist cabinet paints are also available if you desire excellent adhesion and coverage. Ensure you read the guides on each of your paint choices before starting, as each company will have their own opinion on the number of coats needed. 

It’s now time for the first coat! Stir the paint well and apply the first layer with long, even strokes, using a foam roller for large sections and a small brush for the edges and intricate corner details if necessary. Try to avoid heavy coats by applying thin layers, which will allow for quicker drying times and prevent drips. 

Allow the first coat to dry evenly before applying the second, and if necessary, a third layer for a deeper colour and increased durability. 

The key to any renovation project is patience – make sure to allow enough time for each layer to set for the smoothest finish.

Step 6: Reassembly 

Once you are satisfied with your finish, it’s time to reassemble your kitchen and get it ready to shine. 

Carefully reattach the doors, hinges, and handles. Once everything is cured, wipe away any dust or fingerprints for a clean finish. Whilst you’re at it, why not upgrade your kitchen hardware with brand new knobs and handles to complement your brand new kitchen?

Now all that’s left to do is stand back and admire your hard work. 

Learning how to paint kitchen cupboards is one of the most rewarding and satisfying DIY projects you can do. With just the right preparation, tools and patience, you can transform your kitchen into a space that you could only dream of – and at a fraction of the price for a complete renovation. A stylish DIY kitchen makeover is only a few coats of paint away. Need help choosing the perfect fitted kitchen for your space? Contact us, we’re always happy to help.

The post How to Paint Kitchen Cabinet Doors: A Step-by-Step Guide appeared first on TheHub for Home & Kitchen DIY.

In this guide, we’ll show you step by step how to replace a kitchen door, from removing the old fittings to choosing contemporary styles that suit your home. Whether you’re after a sleek gloss finish, a classic shaker design, or something else entirely, Kitchen Door Hub have the perfect selection for you.

Why Replace My Kitchen Doors?

Instead of ripping out perfect units, you can keep the carcasses in place and just update the doors and drawer fronts for a fresh new face that makes a huge difference.

Doing so can:

• Save money: Swapping the doors costs a fraction of the cost of a new kitchen.
  
• Instantly update your style: A change in colour or finish can transform your kitchen from dated to modern in just hours.
  
• Be more Eco-friendly: Reusing your existing cabinets reduces waste and makes your project more sustainable.
  
• Cause minimal disruption: No need for major building work or long installation times, just a screwdriver and a little bit of patience.

Tools and Materials 

Before you begin your project, ensure you have the right tools and parts on hand, as having everything ready will make the job much quicker and smoother.

Tools:

• Screwdriver or drill
  
• Tape measure
  
• Spirit level
  
• Pencil
  

Materials:

• Replacement kitchen doors
  
• Hinges and hinge plates
  
• Handles or knobs
  
• Screws and fixings

How to Replace Kitchen Doors 

Okay, so you’ve decided you’re ready for an upgrade, and you have all the tools ready. Let’s get started on replacing your kitchen doors. Our pro tip is to work on one door at a time to avoid confusion and maintain proper alignment. 

Step 1: Measure your existing doors.

Use a tape measure to accurately measure the height, width, and thickness of your current doors, ensuring your replacements fit perfectly. You can follow our guide on kitchen unit measurements here.

Step 2: Remove old doors

Open the cupboard and unscrew the hinges from the cabinet. Carefully remove the old doors and set them aside, along with the screws, if you’re planning to reuse them.

Step 3: Prepare the new hinges 

If your new doors come with pre-drilled hinge positions, ensure they match your cabinet. For doors without pre-drilled holes, mark the positions carefully using a pencil.

Step 4: Fit the door to the cabinet 

Align the hinges with the cabinet hinge plates, then carefully insert them and tighten the screws. Check the door swings freely and closes evenly.

Step 5: Adjust and Finish 

Use the hinge adjustment screws to fine-tune the door alignment and attach handles or knobs to complete the look. Open and close a few more times to ensure smooth operation.

Which kitchen doors shall I choose?

Selecting the right replacement doors is crucial to achieving the desired look. Consider the following factors when making your choice:

1. Style and Finish

Gloss doors offer a sleek and modern design and are easy to wipe clean. Matte doors bring a soft, contemporary look with a subtle finish to your kitchen. Shaker doors are a classic choice for both traditional and modern kitchens, and woodgrain adds warmth and character to your space.

2. Colour Trends 

Neutral shades, such as white, cream, or grey, are timeless. But bold colours such as navy, sage green, or black make a real statement.

3. Door Size and Compatibility

Ensure your new doors match the dimensions of your existing cabinets. Accurate sizing avoids gaps or uneven alignment.

4. Handles

Choose the perfect handle to complement your style, or opt for a handless finish for a sleek, contemporary look. 

Costs and Time 

Replacing your kitchen doors is quick and affordable, with new doors being just a fraction of the price of a new kitchen. Gloss or shaker are more budget-friendly, as wood or bespoke painted options will likely cost a little more. 

Don’t forget to also factor in hinges, fittings and handles when it comes to your budget to ensure everything is as you would like it in your new kitchen.

In terms of time, a single door can usually be swapped in 15–30 minutes, depending on its complexity. This means that a full kitchen of 10–15 doors can typically be replaced over a weekend by one person. 

Just make sure to plan and gather all the necessary tools and materials to transform your kitchen quickly, with minimal disruption and without exceeding your budget. Make your kitchen refresh easy and affordable with Kitchen Door Hub. With the right tools, materials, and a step-by-step approach, even a beginner can achieve a professional finish of outstanding quality. Ready to start your kitchen transformation? Browse Kitchen Door Hub’s full range of replacement doors, handles, and fittings today and find everything you need. Contact us for any assistance, and we’ll be happy to help you.

The post How to Replace a Kitchen Door: A Step-by-Step Guide appeared first on TheHub for Home & Kitchen DIY.

Here at Kitchen Door Hub, we’ve designed this guide to take you through exactly how to create a kitchen layout step by step, from assessing your room to adding the finishing touches. Whether you’re working with a small galley kitchen or planning a family-sized open plan space, these tips will help you find the perfect balance of style and practicality.

Step 1: Measure and Assess Your Space

The first step in designing a kitchen layout is to understand the space you’re working with. Take accurate measurements of your kitchen (more on this soon) and identify any awkward shapes. This gives you the foundation for planning your layout that will make the most of your kitchen.

How to measure your kitchen:

• Use a tape measure to record the length, width and height of your room.
  
• Note the position of doors, windows, radiators and structural features that can’t be moved.
  
• Mark where existing plumbing, electrics, and gas points are, so you know where your appliances can go.
  

Identify your kitchen shape:
Most kitchens fall into one of a few standard layouts:

• Galley kitchens – narrow with units on one or both sides.
  
• L-shaped kitchens – practical for open-plan spaces.
  
• U-shaped kitchens – great for maximising storage and worktop space.
  
• Island layouts – ideal for families, and if you have a large, open area.

Step 2: Understand the Kitchen Work Triangle

One of the most essential principles in kitchen design is the work triangle. This refers to the three key points in your kitchen: the sink, cooker, and fridge. These should be positioned well so you can move easily between them without obstructions and awkward movements when cooking and using your kitchen.

Why it matters:

• Keeps cooking and cleaning efficiently.
  
• Reduces unnecessary steps when preparing meals.
  
• Helps your layout feel natural and practical.

While the traditional kitchen triangle method is still valuable and worth noting when designing your kitchen, many households now have dishwashers, multiple ovens, or larger fridges. If this is the case, instead of a strict triangle, think about creating work zones for cooking, cleaning, food storage, and prep that work together harmoniously.

In compact or galley spaces, the triangle is fundamental and easy to utilise, as keeping the fridge, sink, and cooker close together makes the best use of every inch.

If you have a bigger, open-plan room, the triangle can be stretched out too far and make your cooking experience awkward. Creating clear work zones (such as an island for prep and cooking, with storage along the wall) helps maintain efficiency.

Step 3: Choose the Right Layout Style

Once you’ve measured your space and thought about the work triangle or zoning in your kitchen, it’s time to decide which kitchen layout style works best for your home and family.

Common kitchen layouts:

• Galley kitchen – units on one or both sides of a narrow room; space-saving and efficient, ideal for couples or single person living.
  
• L-shaped kitchen – fits nicely into corners and open-plan spaces.
  
• U-shaped kitchen – maximises worktop and storage; great for busy households.
  
• Kitchen with an island – adds extra prep space and storage in larger rooms and makes for a great place to gather with loved ones.

Step 4: Plan Storage and Workflow

A practical kitchen layout isn’t just about the best appliances; it’s about ensuring your storage and use are useful, keeping your kitchen organised, and your workflow smooth.

When it comes to storage, create zones for cooking, prep, cleaning, and storage and group items together according to their use and how frequently you reach for them. Ensure you make use of vertical space. Many people forget to look up when planning their kitchen and plan as much as they can on the ground. However, wall cabinets and tall units maximise storage without crowding the floor, giving you more space to work with and a less stressful experience.

Some other things to consider are: pull-out cabinets and bins, allowing you to make the most out of deep cupboards and corner spaces. 

Step 5: Positioning 

Once you’ve planned storage, it’s time to think about where your appliances and utilities will go. Proper placement keeps your kitchen efficient and safe.

Tips for positioning:

• Cooking appliances: Place ovens at a comfortable height and keep the hob near prep areas. It’s also worth considering having your microwave well placed near your oven.
  
• Sink & dishwasher: keep the dishwasher next to the sink for easy loading and rinsing.
  
• Fridge & freezer: remember the triangle and keep these accessible from the primary cooking and prep zones.
  
• Utilities: plan for power sockets, plumbing, and ventilation before finalising the layout.

Step 6: It’s all in the details 

Once all the technicalities are out of the way, it’s time to focus on the best part, the style and finishing touches for your kitchen. 

Kitchen Hub’s Design Tips:

• Door styles and handles: choose kitchen units and kitchen door handles that suit your home and style, whether they be shaker or handleless.
  
• Colours and finishes: coordinate cabinets, worktops, and walls for a cohesive look or opt for daring pops of colour for something fun.
  
• Internal storage solutions: consider pull-out cabinets, bins, and organisers to keep everything tidy.
  
• Lighting: add task lighting for prep areas and ambient lighting for overall mood and feeling in your space.

Designing a kitchen layout doesn’t have to be complicated. Remember, the best layout fits your lifestyle; whether you’re cooking for one, a family, or entertaining friends. Explore our range of kitchen furniture here at Kitchen Door Hub to find affordable, stylish doors and units that help you transform your kitchen layout easily. Contact us with any questions; we’re glad to hear from you.

The post How to Design a Kitchen Layout: A Step-by-Step Guide appeared first on TheHub for Home & Kitchen DIY.

One of the most important design factors to consider is the main colours you’ll choose for your bedroom, as this can really set the tone of the room. There have been many colour psychology studies suggesting that specific colours create specific atmospheres and moods. Therefore, when deciding on colours for your bedroom, hues should carefully be chosen to evoke certain emotional responses.

Here, we look at a few key colours and their corresponding moods:

Red Bedroom

Red is a loud, vibrant tone that makes you feel energetic and passionate. It is a fiery and warm colour, with connotations of power. However, due to its depth, red is often only used as an accent colour as it may otherwise seem overpowering, especially in smaller rooms.

Yellow Bedroom

Moving on to yellow, this colour can brighten up a small, dark, enclosed space and can link to feelings of happiness and optimism. However, only the right shade of yellow will evoke this sense of happiness and optimism as, if it is too bright, it can spark feelings of agitation, and a too-dull yellow may make you feel jealous or ill.

Blue Bedroom

Blue is reminiscent of nature and is thought to promote intelligence, serenity, and loyalty. It can make you feel calm and soothed, which is ideal when looking to create a peaceful home environment, making blue the perfect shade for a bedroom.

Green Bedroom

Green, similarly to blue, is reminiscent of nature. Green can feel rejuvenating and express a sense of freshness, growth, and vitality. Many people like green because it helps them feel safe and secure. It’s a calming hue that promotes feelings of relaxation.

Purple Bedroom

Purple can spark passion and intensity, elevating a room with richness. It can make your bedroom feel lively, which can make you feel light-hearted and playful. However, you can also play purple up or down depending on the shade that you choose.

Orange Bedroom

Orange is thought to stimulate creativity and, similarly to red, is a loud, vibrant tone. Its warmth may energise you, especially if a vibrant shade is used. Orange is a welcoming colour and can promote a sense of cheerfulness to make your bedroom feel cosy and inviting.

Black Bedroom

Although black does have the potential to be harsh, it can connote elegance, sophistication, and power. When combined with the right colour, your space will feel classy, but if you lean too heavily on black, your emotions may be negatively affected.

White Bedroom

Finally, white can give a refreshed and cleansed look, symbolising goodness and purity. It is also an excellent partner with most other colours and is great at opening up small rooms, making them feel larger, which can help put you at ease and relax.

It may be the case that you decide to go all out with colour on walls or accessories and therefore opt for a more monochromatic palette when replacing bedroom doors and drawers, or it may be the case that you do it the other way around.

However you decide to transform your space, catering to your preferences is essential when it comes to your bedroom as, after all, it is a place where you relax, sleep, and enjoy your own comfort. Your bedroom should be a space that you know you’ll love.

The post A guide to perfecting colour in your dream bedroom appeared first on TheHub for Home & Kitchen DIY.

Less is always more with a modern room and if you’re looking to create a space that will bring a calming and soothing atmosphere, then a modern bedroom style may be the right design for you. 

Modern bedrooms are typically characterised by clean lines and sleek surfaces. One of the best ways to achieve this is to update your wardrobe doors and drawer fronts with handleless or slab style doors.

Here we highlight a few of the collections and styles available at Kitchen Door Hub that will help you successfully achieve this sleek, modern look.

Handleless doors

With defined lines and no obtrusive handles, our handleless bedroom door collection creates that crisp look and creates a sense of minimalism. 

This sense of minimalism is perfect for a bedroom, as the absence of furniture and clutter makes the space feel so much more relaxing. 

Kitchen Door Hub supplies a range of doors from 4 different collections; Gravity, Bella, Zurfiz, and Unique. Across these 4 ranges, we offer a wide variety of different styles, so you’re sure to find a door which is perfect for you and your home.

Here’s a selection of some of our favourite handleless doors that can transform your bedroom:

From left to right:

– Bella Elland Matt Pebble

– Bella Knebworth Matt Graphite

– Unique Avienda Ivory

Slab Style Doors

Although handleless doors probably have the edge when it comes to creating a modern space, the sleek look can still be achieved with slab style doors. The only real, noticeable difference is that one style has handles while the other doesn’t.

For those who prefer handles on their units, slab style doors may even be the better option as they still create that sleek look and, with the large range of handles that we have to offer at Kitchen Door Hub, you can make your bedroom look perfectly modern. 

Here’s a selection of some of our favourite slab style doors available at KDH:

From left to right:

– Gravity Evora Stone Graphite

– Bella Pisa Matt Denim

– Zurfiz Ultragloss Limestone

If you’re struggling to make a decision on whether to go handleless or not, then our blog post, pros and cons of handleless doors, offers some helpful tips that will help you decide. However, if you are set on which style of door/drawer that you want to go for, then take a look at our colour options.

As discussed at the start of this blog post, modern spaces are usually characterised by their neutral or muted colours such as white, cream, grey, black, and oak. However, this does not mean that you necessarily need to stick to these colourways as you are free to experiment in any way you want. 

Modern spaces can still feel modern with the inclusion of a bold door colour such as Baltic Blue or Chilli Red. Alternatively, you could stick with neutral colours for your wardrobe doors, but add accent colours using cushions, blankets, artwork, etc.

Contact Us

Ultimately, transforming your bedroom is all about turning it into a space that you love and can relax in. For more advice on bedroom design, get in touch today and our design experts can help make your dream modern bedroom a reality.

The post How to design a modern bedroom appeared first on TheHub for Home & Kitchen DIY.

Aesthetic

The first step to choosing your perfect kitchen doors is understanding what aesthetic you want your kitchen to have. Whether you want a modern, shaker, traditional, cottage core or minimalist kitchen, there will be a perfect kitchen door for you.

Modern kitchens, as seen above, are all about achieving that sleek look, usually characterised by a monochromatic colour palette, clean lines, and minimalism, although there are endless possibilities for how you want your modern kitchen to look.

Shaker kitchens have a very simple and minimalist design, typically with flat centre panels, little to no ornamentation or decoration, and will usually be made of wood, although usually painted to give the room a pop of colour.

Traditional kitchens usually look luxurious and cosy. They are characterised by the use of natural materials, soft muted colours, basic colour palettes, and decorative details and embellishments such as raised panels, crown moulding, and marble or quartz-reminiscent countertops.

Cottage-core kitchens usually have a cosy feel to them. They are essentially a mix of country, traditional, and modern, with features of rustic scenes and natural materials. It’s the opposite of a minimalist design, embracing colour as well as antique/vintage pieces.

Minimalist kitchens are also typically monochromatic and, as the name implies, are very simplistic. They are all about doing more with less and are defined by their sleek lines, functional and integrated appliances, frameless cabinetry, and the occasional pop of colour.

These are just to name a few of the most popular aesthetics, and, of course, there are many more. So, you may prefer one not listed here, or maybe you will find yourself experimenting and creating an aesthetic personal to you.

Style

Once you are set on what aesthetic you want in your kitchen, you can browse the styles of kitchen doors available, such as those shown above. Handleless and slab style doors usually give a sleek look, while shaker and woodgrain doors give your kitchen a cosier feel, and while some styles have names that are obvious to what aesthetic they belong to, such as shaker doors, the style could also happen to be the perfect fit for another aesthetic. It’s all down to what your preferences are. 

Colour

The colour that you choose for your kitchen is probably the most important step as it will be what sets the foundation of your kitchen. For example, if you choose a bold colour such as black, deep blue, or red, all the attention will go to the cabinets, whereas if you go for a more subtle option, the attention may come down to what you decide to decorate your space with. 

Contact Us

Check out our range of kitchen doors here, and for more advice contact us today and our design experts can help you choose the perfect doors for your kitchen.

The post How to Choose the Perfect Doors for your Kitchen appeared first on TheHub for Home & Kitchen DIY.